Electrical issue at home or on a job site? US Emergency Electrician connects you with a licensed, insured local electrician fast — for repairs, replacements, installations, and everything in between.
These are not issues to ignore or schedule "whenever." Electrical faults are a leading cause of residential fires in the United States. If you're experiencing any of these, call a licensed electrician today.
A breaker that trips once may be overloaded. One that trips repeatedly signals a short circuit, ground fault, or an undersized panel that needs professional evaluation.
Outlets that don't work can mean a tripped GFCI, a loose wire connection, or a wiring fault in the circuit — each requiring a different fix from a licensed electrician.
Occasional flicker can be a bad bulb. Persistent flickering throughout your home points to loose main wiring, a failing panel connection, or a utility supply issue.
A burning plastic or electrical smell from outlets, panels, or switches is a serious fire warning. Stop using the circuit immediately and call an electrician right away.
Kitchen, bathroom, garage, and outdoor outlets must be GFCI-protected by code. Non-GFCI outlets in these areas are a shock hazard and a code violation.
Homes with fuse boxes or 60-amp panels cannot safely support modern electrical loads. Upgrading to a 200-amp panel is essential for safety and appliance compatibility.
A baseboard or wall heater that doesn't work can be a thermostat issue, wiring problem, or failed heating element — all best diagnosed by a licensed electrician.
Any new room addition, garage conversion, or kitchen remodel requires new circuits, updated load calculations, and potentially a panel upgrade — all permitted work by a licensed contractor.
From a single outlet to a full panel replacement and home rewire — our nationwide network of licensed electricians handles it all. Residential, commercial, and everything in between.
Outdated 60-amp or 100-amp panels replaced with modern 200-amp service. Essential for homes adding appliances, EVs, or HVAC. All upgrades are permitted and inspected to local code.
High DemandFaulty, tripping, or undersized breakers identified and replaced. AFCI and GFCI breaker installations for bedrooms, kitchens, and bathrooms per current NEC standards.
Dead, sparking, or loose outlets repaired or replaced. New outlet additions, USB outlet upgrades, GFCI protection installation, and 240V outlet installations for appliances and equipment.
Most CommonDamaged, frayed, or aluminum wiring remediated. New circuits added for kitchens, home offices, garages, and outdoor areas. All wiring work done to current NEC and local code requirements.
Chandeliers, pendant lights, recessed LED lighting, outdoor fixtures, bathroom vanity lights, and ceiling fans installed correctly and safely — including new wiring and switch installation.
Electric baseboard heater installation and repair, wall heater rough-in wiring, thermostat replacement, and dedicated circuit installation for heating units throughout the home.
Full electrical rough-in for new room additions, sunrooms, and garage conversions. Panel load analysis, new circuit installation, and final connections — accepted nationwide.
Remodels OKDedicated circuits for kitchen appliances, under-cabinet lighting, GFCI outlets throughout kitchens and baths, exhaust fan wiring, and code-compliant rough-in for full remodel projects.
Subpanel installation, workshop circuits, exterior outlet and lighting installation, EV charger circuit rough-in, and GFCI outdoor outlet installation.
Dial +1 (888) 864-4731. Have your zip code ready and a brief description of your electrical issue. Our specialists are available to take your call.
Take 2–4 minutes to explain what's happening — type of problem, how long it's occurred, your property type (home, rental, commercial), and any relevant panel or wiring details.
A licensed electrician in your area is identified and connected with you. Service rates vary by job scope and location. All work performed by insured professionals.
Panel issues, wiring faults, dead outlets, broken heaters, home addition electrical — describe it in a 2–4 minute call and we'll match you with a licensed electrician near you.
Call +1 (888) 864-4731Every professional in our network holds an active state electrical license and carries liability insurance. We do not connect you with unlicensed handymen or general contractors for electrical work.
Whether you're in New York City or rural Montana, we maintain licensed electrician coverage across every US state. Call with your zip code for immediate confirmation of availability.
Single-family homes, apartments, rental properties, small commercial spaces — all accepted. New home additions, kitchen and bathroom remodels, and garage conversions are all welcome jobs.
From a single GFCI outlet installation to a full 200A panel upgrade and whole-home rewire — no job scope is too small or too complex for our licensed electrician network.
All electrical work performed by our network professionals is completed to current NEC standards and local building codes. Permitted work is available where required by jurisdiction.
Our streamlined call process means you're connected to a specialist and matched with a local electrician in just 2–4 minutes. No long hold queues or automated systems.
Understanding your home's electrical system helps you communicate clearly with your electrician and make informed decisions. Here's what the professionals want you to know.
Most homes built before 1990 have 100-amp or 60-amp electrical service. Today's homes — with electric ranges, HVAC systems, EV chargers, and multiple large appliances — often require 200-amp service to operate safely.
A panel upgrade involves replacing the main electrical panel (service box), the main breaker, and often the service entrance wiring. It requires a permit in most jurisdictions and a utility company disconnection. Costs typically range from $1,500 to $4,000 depending on your location, panel brand, and scope of work.
Signs you need a panel upgrade: lights dim when appliances run, frequent breaker trips, a fuse box instead of breakers, or you're planning a major renovation or EV charger installation.
A circuit breaker's job is to interrupt current flow when something goes wrong. When a breaker trips once, you can usually reset it. When it trips repeatedly, that is a message from your electrical system that something needs professional attention.
Overloaded circuit — too many devices drawing power from one circuit. Solution: redistribute loads or add a dedicated circuit. Short circuit — hot wire contacts a neutral wire, creating a direct path with zero resistance. This produces heat and is a fire risk. Ground fault — hot wire contacts a ground path (damp wall, metal box). Failing breaker — breakers wear out, especially older ones.
Never repeatedly reset a tripping breaker without investigating. Call a licensed electrician to diagnose the root cause.
GFCI (Ground Fault Circuit Interrupter) outlets detect ground faults — dangerous current leaking outside the circuit path, which can cause electrocution. They are required by code in kitchens, bathrooms, garages, outdoors, basements, and near any water source.
AFCI (Arc Fault Circuit Interrupter) protection detects arc faults — dangerous sparking inside wiring that can cause fires. AFCI breakers are now required in bedrooms, living rooms, and most habitable spaces in new construction under the NEC 2020 code adopted by most states.
If your home lacks GFCI protection in wet areas, this is both a safety hazard and a code violation. A licensed electrician can install GFCI outlets or GFCI breakers relatively quickly.
Electric baseboard heaters and wall heaters are common in many US homes, particularly in the Northeast, Pacific Northwest, and mountain states. Each heater requires a dedicated 240V circuit — a circuit that serves only that heater and nothing else.
Common issues: heater doesn't turn on (failed thermostat or heater element), heater runs constantly (stuck thermostat or wiring issue), circuit breaker trips when heater runs (undersized circuit or failing element).
Installing a new baseboard heater requires running new 240V wiring from the panel, installing a dedicated breaker, and wiring a wall thermostat. This is not a DIY project — incorrect 240V wiring is a serious shock and fire hazard.
Any home addition — new bedroom, sunroom, garage conversion, or finished basement — requires a permit and licensed electrical work in virtually every US jurisdiction. The permit process ensures the electrical system is safe and that your homeowner's insurance remains valid.
What's involved: panel load calculation to ensure existing service can support new circuits, new circuit runs from the panel to the addition, outlet placement per NEC code (minimum every 12 feet along walls), lighting circuits, and smoke detector installation.
Kitchen and bathroom remodels have the most code requirements: dedicated 20-amp small appliance circuits, GFCI protection at all outlets, under-cabinet lighting wiring, and exhaust fan circuits. Plan for electrical before drywall goes up.
Between 1965 and 1973, aluminum wiring was commonly used in US residential construction as a cheaper alternative to copper. Aluminum wiring is now known to cause connection problems — it expands and contracts with temperature changes, loosening connections over time and creating fire hazards.
Homes with aluminum branch circuit wiring require special attention. Remediation options include: replacing aluminum wiring entirely with copper, installing CO/ALR-rated devices at every connection point, or pigtailing copper connections at all outlets and switches using approved connectors (COPALUM or AlumiConn).
If your home was built between 1965 and 1973, have a licensed electrician inspect your wiring. A simple visual inspection of your panel can often reveal whether aluminum wiring is present.
If you're dealing with a serious electrical issue right now, these steps can protect you and your family while waiting for a licensed electrician.
Turn off the main breaker at your electrical panel if you can do so safely. Do not use any outlets in the affected area. If you see smoke or actual fire, evacuate and call 911 first, then us. Burning electrical smell near a panel or outlet is a fire emergency, not a routine repair.
Every time a breaker trips, it is protecting you from a dangerous condition. Resetting it without diagnosing the cause can allow a wiring fault or overload to persist. If a breaker trips more than twice for the same circuit, leave it off and call a licensed electrician before using that circuit again.
An outlet that sparks when you plug something in — or that feels warm or hot to the touch — has a wiring problem. Stop using it immediately. Cover it with outlet caps so nothing is inadvertently plugged in, and call an electrician to inspect and replace it.
Power strips and extension cords are temporary solutions, not permanent wiring substitutes. Running too many high-draw devices through a power strip — especially space heaters, air conditioners, or microwaves — creates a fire risk. If you're relying on extension cords for daily use, you need additional circuits installed by a licensed electrician.
GFCI outlets have a test button and a reset button. Press the test button — the outlet should lose power. Press reset to restore. Do this monthly in kitchens, bathrooms, and garages. A GFCI that won't reset or doesn't trip on test has failed and needs replacement.
Costs vary significantly by region, complexity, and local labor rates. The ranges below are general US averages to help you understand what's involved before calling. Actual pricing is determined by the local electrician.
| Service | Typical US Range | Notes |
|---|---|---|
| 200-Amp Panel Upgrade | $1,500 – $4,000 | Includes labor, panel, permits. Higher in CA, NY, WA. |
| Circuit Breaker Replacement | $150 – $400 | Single breaker. More for AFCI/GFCI type breakers. |
| Outlet Replacement / GFCI Install | $100 – $250 | Per outlet. Less if multiple done at same time. |
| New Circuit Installation | $250 – $750 | Varies by distance from panel and access difficulty. |
| Ceiling Fan / Fixture Install | $100 – $300 | More if new wiring or switch leg required. |
| Baseboard Heater Install | $300 – $900 | Includes dedicated 240V circuit installation. |
| Home Addition Electrical | $2,000 – $8,000+ | Varies by square footage, panel capacity, and scope. |
| Kitchen Remodel Electrical | $1,200 – $4,000 | GFCI circuits, dedicated appliance circuits, lighting. |
| Wiring Repair | $150 – $600 | Depends on access and extent of damage. |
* All prices are general national averages for informational purposes only. Actual costs vary by location, contractor, job complexity, and material costs. Rates are set by individual licensed electricians in your area.
Have your zip code and issue description ready. Our 2–4 minute call will match you with a licensed, insured electrician near you for any electrical job — repairs, installations, upgrades, or remodels.
Call (888) 864-4731US Emergency Electrician maintains coverage in every US state and major metro area. Call with your zip code to confirm same-day or next-day availability in your specific city.
"My panel kept tripping on Saturday night. Called this number, described the issue in about three minutes, and had a licensed electrician at my door the next morning. Panel replaced, everything up to code. Worth every cent."
"We had a burning smell coming from our kitchen outlet. Scary situation. Called immediately, the rep walked me through turning off that circuit, and connected us with a local electrician within the hour. Turned out to be a loose wire behind the outlet — caught before anything bad happened."
"Adding a bedroom to our house and needed a licensed electrician for the rough-in. Called, explained we needed electrical for a home addition, and they matched us with a contractor who does that work regularly. Job passed inspection first try."
"Three baseboard heaters in our older home stopped working in January. Quick call, described each heater location and what it was doing, and the electrician they connected us with knew exactly what to bring. Two needed new thermostats, one needed a new breaker."
"Kitchen remodel and I had no idea who to call for the electrical work. Used this service, had a great call describing what we needed — dedicated circuits for the range, dishwasher, microwave, and GFCI outlets throughout. Electrician nailed it."
"Called about upgrading our 100-amp panel to 200 amps. The specialist on the phone explained what questions to ask, connected us with a local electrician who gave us a fair price, pulled permits, and got it done. Straightforward process."
Electrical hazards don't improve over time — they get worse. One 2–4 minute call is all it takes to get matched with a licensed, insured electrician in your area who can solve the problem right.
Call +1 (888) 864-4731 Now